Cutters, Pilots & Spare Parts
PILOTS
Stem-1
Spacer-5
Collet-2
Expander-3
Nut-4
NOTE: Orders for Expandable Pilots MUST include PILOT PART No., SUFFIX and DESCRIPTION. -Spacer available only for 150-8(5/16") expandable pilot. Used on VW Rabbit or any engine with valve guided less than 1 1/2"(38mm) long.

INFORMATION ON PILOTS
100 & 120 Small Series Pilots have a .297" diameter top section and are used with small "100" series cutters.
100 Series Solid Pilots
Pilots are tapered. Measurement is taken at the centre of pilot. The taper is 0.0007"/inch.
120 Series Expandable Pilots
Pilot measurement is taken at the centre of expanding collet. Collets expand a total of 0.020" (0.5mm) from 0.003" under the stated size to 0.017" over stated size.
140, 150 & 200 Standard Series Pilots have a .375"diameter top section and are used on the "200" and "600" series cutters.
140 Series Solid Pilots
Pilots are tapered. Measurement is taken at the centre of pilot. The taper is 0.0007"/inch.
150 Series Expandable Pilots
Pilot measurement is taken at the centre of expanding collet. Collets expand a total of 0.020" (0.5mm) from 0.003" under the stated size to 0.017" over stated size.
200 Series Expandable Pilots are similar to 150 Series expanding pilots but have longer collets to fit heads with extra long guides.
PART NO. DESCRIPTION
100 SERIES SOLID PILOTS - ALL SIZES ( .297 Top)
120 SERIES EXPANDING PILOTS - ALL SIZES ( .297 Top)
140 SERIES SOLID PILOTS - ALL SIZES ( .375 Top)
150 SERIES EXPANDING PILOTS - ALL SIZES ( .375 Top)
200 SERIES EXPANDING PILOTS - ALL SIZES ( .375 Top)
303 3 CUTTER CASE
160 6 CUTTER CASE
497 11 CUTTER CASE
503 2 PIECE STEEL T/HANDLE INC HEX TUBE 4
503-1 100 SERIES ADAPTOR (1/2 3/8 HEX)
503-8 8" EXTENTION
503-12 12" EXTENTION
505 NYLON T/HANDLE (STEEL SLEEVED HEX)
513 NYLON T/HANDLE (STEEL SLEEVED 3/8 HEX)
515 EASY TURN WRENCH HEX
564 5/64 HEX SCREW DRIVER
332 3/32 ALLEN KEY
245 PILOT PULLER PIN
267 CLEANING BRUSH
N.T.S. V-TYPE HEADS STANDS (PAIR)
1800-VS VARIABLE SPEED MOTORISED UNIT
 
Standard T Wrench
505 & 513


Easy Turn Handle
Has a spring loaded
centre spindle and swivel handle so that constant central force can be
placed on the cutter.
This is less likely to
exert side force on cutter.